Notice from the Producer
The referenced Software of Carl Zeiss ("Zeiss Software"), contained in this
documentation, was designed, realized, verified, validated and released in
a certificated process environment. The quality management system is
certified following DIN EN ISO 9001.
The fields of application of the Software are common tasks and
applications in microscopy and/or imaging (so called "Off-The-Shelf
Software"). Though the user acknowledges that in any kind of use the end
user of the Software is responsible for the validation of the Software for the
end user’s dedicated intent of use considering all requirements of law and
standards (e. g. 21 CFR part 11, FDA, MDD etc.). If necessary the end
user has to establish, document, implement and maintain a special process
to fulfill all the requirements to conform with the valid rules of law and
standards.
CARL ZEISS DOES NOT WARRANT THAT THIS SOFTWARE IS
USABLE FOR SPECIAL PURPOSES OTHER THAN IN THE FIELDS OF
APPLICATION DEFINED ABOVE.
Safety
Refer to the safety notes and instructions in the manuals of
all necessary devices (e.g. microscope peripherals,
cameras, computers, computer additionals, etc.) before
installing and using the software
(see also "Safety Notes
AxioVision, AxioVision LE, SAP 000000-
2054-368
").
Summary of Contents for Axiocam 105 color
Page 1: ...Axiocam 105 color Installation Reference 10 2013 October 2013 ...
Page 2: ......
Page 6: ......
