![background image](http://html.mh-extra.com/html/zeiss/axiocam-105-color/axiocam-105-color_installation-and-reference-manual_927496051.webp)
Trouble Shooting
Axiocam 105 color Instal Reference Guide
43
The color does not correspond to the impression through the
ocular
Check white balance and, if necessary, repeat white balance.
Check the
monitor’s color temperature setting. If necessary, reduce
this to the lowest value that can be set (usually 5200 K).
Check whether the gamma curve 0.45 function is activated. To do
this, open the
Properties window
.
The performance of the camera is not consistent or is too slow
Generally the performance of the camera is dependent on the
performance of the PC. Make sure the PC hardware and setup are
optimal for large data transfers.
Check that the camera is connected to the provided USB 3.0
interface card (and not a USB 1 or USB 2 port) on the PC.
Make sure no other devices are plugged into the USB 3.0 interface
card.
Try plugging the camera into a USB 3.0 port that is farther from the
PC’s motherboard.
Try plugging the USB 3.0 interface card into a slot that is not
directly next to the Graphics card slot.
Disable "
USB selective suspend setting
" under Start >Control
Panel >Power Options >Change plan settings (for whichever is
your active plan) >Change advanced power settings.
Summary of Contents for Axiocam 105 color
Page 1: ...Axiocam 105 color Installation Reference 10 2013 October 2013 ...
Page 2: ......
Page 6: ......