Carl Zeiss draws the User's attention to the fact that the information and references
contained in these documents may be subject to technical modifications, in
particular due to the continuous further development of Carl Zeiss's products. The
documents enclosed do not contain any warranty by Carl Zeiss with regard to the
technical processes described in the documentation or to certain reproduced
product characteristics. Furthermore, Carl Zeiss shall not be held liable for any
possible printing errors or other inaccuracies in this documentation, unless proof
can be furnished that any such errors or inaccuracies are already known by Carl
Zeiss or that these are not known to Carl Zeiss due to gross negligence and that
furthermore Carl Zeiss has for these reasons refrained from eliminating these errors
or inaccuracies appropriately. Carl Zeiss hereby explicitly draws the User's attention
to the fact that this manual only contains a general description of the technical
processes and information, the implementation of which in any individual case may
not be appropriate in the form described here. In cases of doubt, we recommend
the User to consult Carl Zeiss. This manual is protected by copyright. Carl Zeiss
has reserved all rights to this documentation. It is prohibited to make copies, partial
copies, or to translate this manual into any other language, except copies for
personal use. Carl Zeiss explicitly draws attention to the fact that the information
contained in this manual will be updated regularly in compliance with the technical
modifications and supplements carried out in the products and furthermore that this
manual only reflects the technical status of Carl Zeiss's products at the time of
printing. Microsoft, Windows, and Windows 7 are registered trademarks of Microsoft
Corporation in the United States and/or other countries.
Carl Zeiss Microscopy GmbH
Carl-Zeiss-Promenade 10
07740 Jena, Germany
Carl Zeiss Microscopy GmbH
Königsallee 9-21
37081 Göttingen, Germany
© Carl Zeiss Microscopy GmbH, 2013
authorized dealer:
Pulch + Lorenz microscopy
Am Untergrün 23, D-79232 March
tel:
07665 9272-0
fax:
07665 9272-20
mail: [email protected]
web: pulchlorenz.de
Summary of Contents for Axiocam 105 color
Page 1: ...Axiocam 105 color Installation Reference 10 2013 October 2013 ...
Page 2: ......
Page 6: ......
