1. INSTALLATION
Installing the support panel:
Step 1:
Use an impact drill
(φ
8 mm,
depth 60-65 mm) to drill the holes.
Reposition and drill the holes in case of
significant deviation.
Step 2:
Install support panel B on the
wall and fasten the expansion bolt.
Step 3:
Adjust support panel A, making
sure that the holes on both panel A and B
are perfectly aligned.
Step 4:
Connect and secure panel A and B
using M6*16 screws.
Installing the cover:
After ensuring the correctness and reliability of the electrical connections, install the outer protective cover
and secure it with the screws.
5
