Zcom WS5G2, User Manual

Page: 30 / 78

Hyperion Series Wireless LAN Controller User Manual
58-150008-IQN_V1.0 Page 27
Select [Network > DHCP Setting] in the menu to enter the configuration page as following:
Figure 4-15 Static Route Page
These parameters in [Network > DHCP Setting] page is described in details as following:
Parameter Description
WLC/AC IP Address 1~4 for AP
Access A thin AP can access up to 4 WLCs to achieve redundant security. Once the
primary WLC fails, the thin AP can automatically switch to another redundant
WLC. The four IP addresses provided here stand for four available WLCs. These IP
addresses are actually the CAPWAP tunnel termination IP addresses in the WLC,
which will be delivered in the form of DHCP option 43 during the thin AP DHCP
process to tell the thin AP where to establish the CAPWAP management tunnel.
Usually, one WLC is enough!
Interface Binding current DHCP server configuration to the port:

TAP: The thin AP port which is the WLAN port for thin AP accessing to
WLC, therefore, the DHCP server bound to this port is used for allocating
IP addresses to thin AP.

VIF1~8: Totally 8 VLAN Interfaces in WLC as the virtual ports for user
services, therefore, the DHCP server bound to these ports are used for
allocating IP addresses to wireless user clients.
Starting IP Address The 1’st IP address in this DHCP address pool for allocation.
Ending IP Address The last IP address in this DHCP address pool for allocation.
Subnet Mask Allocate a netmask to this DHCP address pool to divide which subnet it is
belonged to.
Default Gateway The default gateway IP address for allocation together in current DHCP address
pool.
Primary DNS Server The 1’st DNS server IP address for allocation together in current DHCP address
pool.