Zcom WS5G2, User Manual

Page: 47 / 78

Hyperion Series Wireless LAN Controller User Manual
58-150008-IQN_V1.0 Page 44
Parameter Description
TX Power Adjust If Manual mode is selected in above “TX Power Mode”, then manually click on the
add ( + ) or subtract ( - ) button here to increase or decrease the transmit power. The
adjustment step value is 0.5 dBm one time.
Click the Apply button to accept the changes made.
Click the Cancel button to discard the changes made.
6.4. VAP P
ROFILE
A physical thin AP can be logically divided into up to 8 virtual APs identified by different SSID, and these virtual APs
share the same
Common Profile and Wireless Profile . However, each virtual AP may have some parameter settings
independent of each other; therefore, a specific virtual AP configuration file called a VAP Profile must be configured for
different virtual APs.
Select
[Thin AP Configuration > VAP Profile] in the menu to enter the configuration page as following:
Figure 6-7 VAP Profile Entrance Page
Click the
Cancel button to discard the changes.
Click the Add New button to add a new profile.
Click the Backup button to save the profile to the file in local PC.
Click the Delete button to remove a profile.
Click the Delete All button to remove all profiles from the list.
Click the Edit button to modify an existing profile in the list.
Click the Restore button to recover a profile from the file in the local PC.
Click the Select All button to select all profiles in the list.