Zcom WS5G2, User Manual

Page: 51 / 78

Hyperion Series Wireless LAN Controller User Manual
58-150008-IQN_V1.0 Page 48
Parameter Description
Base MAC Address The MAC address of current WLC management port.
TAP IP Address IPv4 The IPv4 address of current WLC WLAN port (i.e., thin AP access port ).
License State If AP License is not imported yet, the state here is “ not config ”.
Import License A button to perform the operation of importing the AP License file from local
host directory.
Export License A button to perform the operation of exporting the AP License file to local host
directory.
Click the Refresh button to update the AP License state.
6.7. AP FW U
PGRADE
In the Wi-Fi system with WLC, the thin AP can upgrade its firmware through WLC centrally, instead of upgrading one at
a time. It can be done by entering
[Thin AP Configuration> AP Firmware Upgrade] .
Select
[Thin AP Configuration > AP FW Upgrade] in the menu to enter the configuration page as following:
Figure 6-11 AP Firmware Upgrade Page
Click <
Browse > button to select the new version of thin AP firmware from local host directory, then click < Upload >
button to load the new version firmware to WLC to inform the thin APs for upgrading. The upgrading information of
each thin AP will be displayed in the
Realtime Log Window .
6.8. O
PTIMIZATION
In most practical applications, the environment variation results in Wi-Fi system performance degradation, therefore,
the parameters optimization has to be performed to improve it.