Zcom WS5G2, User Manual

Page: 7 / 78

Hyperion Series Wireless LAN Controller User Manual
58-150008-IQN_V1.0 Page 4
WS5G2 WS7G2 WS10G2
Reset Switch
1 1
1
Default Switch
1 1
1
SFP+ Ports (10 Gbps)
- 2
4
RJ45 LAN Ports (1 Gbps)
4 6
6
Console Port (RJ45)
1 1
1
USB 2.0 Ports
2 2
2
Hardware Component Description
Power
WS5/7G2: One 12V/5A DC adapter
WS10G2: One 12V/7A DC adapter
Reset Switch One
Default Switch One
SFP+ Ports
The default IP address of the WLC through the VIF SFP+ ports is 192.168.3.228 .
Note: All 10G SFP+ Ports in WLC support mono mode optic fiber.
RJ45 Ports
•
The management port must be the first RJ45 1GbE port. The default IP address
of the WLC through the
Mgmt port is 192.168.2.228 .
•
The WLAN port is for thin AP accessing and wireless clients’ data tunnel, which
could be a RJ45 port other than the Management Port.
Console Port The Console Port is for debug or troubleshooting by IT staff.
USB 2.0 Ports Two USB 2.0 ports, which are reserved for further applications.
2.3. LED I
NDICATORS
The following table describes the LED indicators available on the front panel of the WS5/7/10G2.
LED Indicator Color Behavior Description
Power
Green
Solid On
The system is powered on.
Off
The system is powered off.
HDD
Green
Blinking
Data transfer activity is taking place.
Off
No data transfer activity is taking place.
SFP+ LEDs
Orange
Solid On (Right)
Connection active at 1 Gbps
Blinking (Left)
Sending and receiving data
Off
No connection active or port is disabled.
RJ45 LAN LEDs
Green Solid On (Right)
Connection active at 10/100 Mbps
Orange Blinking (Left)
Sending and receiving data
Off
No connection active or port is disabled.