Zcom WS5G2, User Manual

Page: 21 / 78

Hyperion Series Wireless LAN Controller User Manual
58-150008-IQN_V1.0 Page 18
Parameter Description
VLAN List Click < Add > button to append above new VLAN configuration to the VLAN list for
displaying. Only those VLAN IDs in this list are available for WLC configuration.
Click the Add button to append new VLAN to VLAN list.
Click the Delete button to remove a VLAN from VLAN list.
Click the Edit button to modify VLAN configuration in VLAN list.
4.5. P
ORT
VLAN
Since the physical port is the entrance for external data packets to enter the WLC, if the WLC is deployed in a
VLAN-configured network, the physical port as the ingress should have its PVLAN (Port VLAN) been configured to
handle the incoming packets.
Select
[Network > Port VLAN] in the menu to enter the configuration page as following:
Figure 4-6 Physical Ports Page
These parameters in
[Network > Port VLAN] page is described in details as following:
Parameter Description
Enable ForcedRate This is a switch to disable the speed auto-negotiation function for all physical ports.
GE2~GE5 The GbE physical port as the ingress is configured as:

PVLAN: The PVLAN ID for this GbE physical port is used to match the
incoming packets tagged by a VLAN ID. Note, this VLAN ID must be the
available one which is created in [
Network > VLAN Creation ].

Link Status: Two status for this GbE physical port: Up indicates it is
activated; Down indicates it is disabled.
XG1 The 10G physical port as the ingress is configured as:

PVLAN: The PVLAN ID for this 10G physical port is used to adaptive to the
incoming packets tagged by a VLAN ID. Note, this VLAN ID must be the
Note: Only those ports which have been classified to WLC type in [ Port Classification ] can be listed out here
for physical ports configuration.