ZBA Inc.
66
•
Clear One Data Format
This deletes one data format for one symbology. If you are clearing the primary format, scan
0
. If you are clearing an alternate format, scan
1
,
2
, or
3
,
depending on the alternate format you are clearing. Scan the Interface Type and Code I.D. , and the bar code data length for the specific data format that you
want to delete. All other formats remain unaffected.
•
Save:
This exits, saving any Data Format changes.
•
Discard :
This exits without saving any Data Format changes.
Enter Data Format
Clear One Data Format
Save
*Default Data Format
Clear All Data Formats
Discard
9.3 Data Format Editor Commands
Send Commands
F1 Send all characters followed by “xx” key or function code, starting from current cursor position.
Syntax = F1xx
(xx stands for the hex value for an ASCII code.
F2 Send “nn” characters followed by “xx” key or function code, starting from current cursor position.
Syntax = F2nnxx
(nn stands for the numeric value
(00-99) for the number of characters and xx stands for the hex value for an ASCII code.
F3 Send up to but not including “ss” character (Search and Send) starting from current cursor position, leaving cursor pointing to “ss” character followed by
“xx” key or function code.
Syntax = F3ssxx
(ss and xx both stand for the hex values for ASCII codes.
F4 Send “xx” character “nn” times (Insert) leaving cursor in current cursor position.
Syntax = F4xxnn
(xx stands for the hex value for an ASCII code, and
nn is the numeric value (00-99) for the number of times it should be sent.)
E9 Send all but the last “nn” characters, starting from the current cursor position.
Syntax = E9nn
(nn is the numeric value (00-99) for the number of
characters that will not be sent at the end of the message.)
Move Commands
F5 Move the cursor a head “nn” characters from current cursor position.
Syntax = F5nn
(nn stands for the numeric value (00-99) for the number
ofcharacters the cursor should be moved ahead.)
F6 Move the cursor back “nn” characters from current cursor position.
Syntax = F6nn
(nn stands for the numeric value (00-99) for the number of characters
the cursor should be moved back.)
F7
Move the cursor to the beginning of the data string.
Syntax = F7
. EA Move the cursor to the end of the data string.
Syntax = EA
Search Commands
F8 Search ahead for “xx” character from current cursor position, leaving cursor pointing to “xx” character.
Syntax = F8xx
(xx stands for the hex value for an ASCII code.
F9
Search back for “xx” character from current cursor position, leaving cursor pointing to “xx” character.
Syntax = F9xx
(xx stands for the hex value for an
ASCII code.
Summary of Contents for ZB-3062
