ZBA ZB-3062, User Manual

Page: 32 / 89

ZBA Inc.
32
7.7 Print Weight
Print Weight is used to adjust the way the imager reads Matrix symbols. If a imager will be seeing consistently heavily printed matrix symbols, then a print
weight of 6 may improve the reading performance. For consistently light printing, a print weight of 2 may help. After scanning the Set Print Weight bar
code, set the print weight (from 1-7) by scanning digits from the inside back cover, then scanning Save . Default = 4.
Print Weight
Set Print Weight
*Default
7.8 Video Reverse
Video Reverse is used to allow the imager to read bar codes that are inverted. The “Off” bar code below is an example of this type of bar code. If additional
menuing is required, Video
Reverse must be disabled to read the menu bar
codes and then re-enabled after menuing is completed.
Note: Images downloaded from the unit will not be reversed. This is a setting for decoding only.
7.9 Working Orientation
Some bar codes are direction-sensitive. For example, Kix codes and OCR can misread when scanned sideways or upside down. Use the working orientation
settings if your direction-sensitive codes will not usually be presented upright to the scanner. Default = Upright.
Video Reverse
On