USER AND MAINTENANCE MANUAL
18
ELECTROPNEUMATIC VALVE
MZD100
The use of the valve with adhesives, glues or general fluids must be respect the following basic rules.
Before use a specific type of fluid check that:
• The fluid viscosity is compatible with the features of the valve
• The characteristics of the fluid meet the desired requirements
• The datasheet of the fluid provided by the manufacturer includes all the informations about the fluid
such as: viscosity, applications, gluing time (for glues or adhesives) and storage
• The storage time of the fluid has not been exceeded
• The fluid has not been exposed to temperatures near or below than zero therefore it has deteriorated
• The packaging of the fluid are sealed
For the use of special adhesives, glues or fluids we recommend to contact the Zator company to verify
the compatibility of the application.
Before use a different type of fluid clean accurately the valve to avoid possible contamination of the new
fluid.
When used water-based adhesives of glues they are easily removable with water in their liquid state.
However, when they harden is more difficult to remove it. For this reason, before long stop it is
recommended to wash accurately the valve. Please refer to the maintenance program shown in this
manual.
2.6
Use of adhesives, glues or other fluids
