SECTION 2 - SAFETY RULES AND REGULATIONS
17
Zator
Via Galvani, 11 - 20095 - Cusano Milanino (MI) - Italy
www.zator.it - [email protected]
Zator’s products are manufactured in compliance with the laws in force during its construction.
The personnel will be trained and qualified to take advantage of the installed valve requirements.
The personnel must operate in a comfortable space that could be guarantee safety and hygiene for the
operator.
In case of a different destination or necessity of use of the valve, it’s appropriate to refer to the technical
offices of the Zator Srl.
Goods in packaging
Outside the package are indicated all the information about the content identification and the safety
movement:
• address of the sender and the addressee
• dimensions: length – width – height
• gross – net – tare weight
• annotations and pictograms (ex. brittle, handle with care, high)
CAUTION: The customer must check the condition of the goods upon its arrival.
Predispositions: choose the installation space
Without prejudice to specific dispositions, the customer will be provide to:
• Appropriate logistic arrangement for the placement and conduction of the electropneumatic valve
• Power supply, including the protective conductor usually called “GROUNDED”
• Electrical equipment arrangement and possible pneumatic system
• Wear materials
For the electrical connection it is necessary to have a preferential line of power supply with the features
listed in “technical features”.
Pneumatic connections
CAUTION: The compressed air must be free of humidity. It is necessary to assemble on the
compressor one or more automatic condensation outlet; the air must be filtered and dried out.
Make sure that in the pneumatic circuit is not inserted any type of substances (ex. lubrificants
or other substances).
2.5
Installation - General instructions
