USER AND MAINTENANCE MANUAL
12
ELECTROPNEUMATIC VALVE
MZD100
The electropneumatic valve MZD100 is designed and manufactured in compliance with the current safety
standard. Only trained personnel is authorized to install and use the valve. For the electropneumatic
valve MZD100 are provided only and exclusively the application fields describe in this manual. All data
and parameters indicated in this manual must be respected. Any other use is considered improper.
All operations performed with the electropneumatic valve MZD100 must be carry out in compliance with
the following current safety rules and regulations written in part:
1. Rules of fire prevention
2. Directive 2006/42/CE of European Parliament and Council of the 17th of May 2006 regarding to
machines and that modify directive 95/16/CE (recasting)
3. Directive 2014/30/UE of European Parliament and Council of the 26th February 2014 regarding the
harmonization of the UE Countries laws about the electromagnetic compatibility (recasting)
4. Rule 2016/425/UE of the 9th of March 2016, about the personal protection equipment and that
abrogates the directive 89/686/CEE of the Council
2
SAFETY RULES AND REGULATIONS
Before the start-up of the electropneumatic valve the personnel must be adequately informed and trained
on its use, direction and start-up process, as well as the safety norms to be performed and also observe
how it is prescribed in this document and in other documents possibly attached to the microprocessor
control.
The employer must provide to instruct the personnel on the risks of injury, on safety devices and accident
prevention general rules provided by the community directives and the legislation of the country where
the microprocessor control is installed.
CAUTION: Always disconnect the power supply before proceed to carry out any maintenance
or adjustment operations. Discharge the fluid pressure before to proceed to carry out any
maintenance or adjustment operations.
2.1
Safety and environment general informations
