USER AND MAINTENANCE MANUAL
32
ELECTROPNEUMATIC VALVE
MZD100
NO
SI
13
!
10
Insert the spring:
4
Screw* the adjustment block in the valve body with a 13mm
wrench;
5
Screw** the nozzle with a 10mm wrench;
6
*Pay
attention
that the
adjustment block is not tilted
during the screwing to avoid
damage to the thread.
**Before screwing the nozzle, check that the micrometric
adjustment handle are completely loosened to avoid damage
to the nozzle and needle. To loosen the adjustment screw/
the handle, turn it counter-clockwise until it doesn’t resist
anymore.
