AFDZP0BA – VCM Zapi 2uC - User Manual
Page - 21/54
7 DESCRIPTION OF THE CONNECTORS
7.1 CNA Ampseal 35 poles
A1
POWER IN 1
Power input 1. The power supply for loads must be
connected here with a fuse in series.
A2
NEVP3
Output of the current controlled electrovalve EVP3; 2 A
maximum continuous current (driving to –Batt); built-in
freewheeling diode to A14.
A3
NEVP4
Output of the current controlled electrovalve EVP4; 2 A
maximum continuous current (driving to –Batt); built-in
freewheeling diode to A14.
A4
NEVP7
Output of the current controlled electrovalve EVP7; 2 A
maximum continuous current (driving to –Batt); built-in
freewheeling diode to A16.
A5
NEVP8
Output of the current controlled electrovalve EVP8; 2 A
maximum continuous current (driving to –Batt); built-in
freewheeling diode to A16.
A6
NEV1
Output of the PWM voltage controlled electrovalve
EV1; 2 A maximum continuous current (driving to –
Batt); built-in freewheeling diode to A17.
A7
NEV2
Output of the PWM voltage controlled electrovalve
EV2; 2 A maximum continuous current (driving to –
Batt); built-in freewheeling diode to A17.
A8
DI1
Input of the switch DI1. The input is active high.
A9
DI2
Input of the switch DI2. The input is active high.
A10
DI3
Input of the switch DI3. The input is active high.
A11
CANL 1
CAN 1 Low signal.
A12
CANH 1
CAN 1 High signal. A 120R termination resistance is
present between CAN L1 and CAN H1.
A13
PEVP 1/2
Common positive supply for EVP1 and EVP2 .This
signal is the voltage redirected from CNA-1 through a
Smart Driver
(not present for 80V version)
and a
diode.
A14
PEVP 3/4
Common positive supply for EVP3 and EVP4 .This
signal is the voltage redirected from CNA-1 through a
diode.
A15
PEVP 5/6
Common positive supply for EVP5 and EVP6 .This
signal is the voltage redirected from CNA-1 through a
diode.
A16
PEVP 7/8
Common positive supply for EVP7 and EVP8 .This
signal is the voltage redirected from CNA-1 through a
diode.
A17
PEV1
Common positive supply for EV1 and EV2 .This signal
is the voltage redirected from CNA-1 through a diode.
A18
DI4
Input of the switch DI4. The input is active high. Read
by both microcontrollers.
