Zanussi ZCG61236XA User Manual Download

Page: 9 / 28

Burner overview

A. Burner cap

B. Burner crown

C. Ignition candle (if applicable)

D. Thermocouple (if applicable)

Turning the burner off

To put the flame out, turn the knob to the off
position .

WARNING!

Always turn the flame down or

switch it off before you remove the

pans from the burner.

Hob - Hints and tips

WARNING!

Refer to Safety chapters.

Cookware

WARNING!

Do not put the same pan on two

burners.

WARNING!

Do not put unstable or damaged

pots on the burner to prevent from

spill and injury.

CAUTION!

Make sure that pot handles are not

above the front edge of the cooktop.

CAUTION!

Make sure that the pots are placed

centrally on the burner in order to

get maximum stability and to get

lower gas consumption.

Diameters of cookware

WARNING!

Use cookware with diameters

applicable to the size of burners.

Burner

Diameter of cook-

ware (mm)

Rapid

160 - 260

Semi-rapid

140 - 240

Auxiliary

120 - 180

Energy saving

• If it is possible, always put the lids on the

cookware.

• When the liquid starts to boil, turn down the

flame to barely simmer the liquid.

Hob - Care and cleaning

WARNING!

Refer to Safety chapters.

General information

• Clean the hob after each use.

• Always use cookware with clean bottom.

www.zanussi.com

Summary of Contents for ZCG61236XA





























Search results

Summary of Contents for ZCG61236XA

Reviews:

Related manuals for ZCG61236XA

Brands by name

Popular brands

Zanussi ZCG61236XA, User Manual

Search results

Summary of Contents for ZCG61236XA

Reviews:

Related manuals for ZCG61236XA

Brands by name

Popular brands