5. OPERATION
SYNTHESIS E
21
5.4.6.
Programming switching on
To enter the setting mode for the
programmed
switching
on,
press
and
immediately release the key enable/disable
auto power (Fig.18) with the oven on or off.
At first the state of the automatic
switching on (active or inactive) appears on
the display (AUTOSTART : ON or OFF).
To enable or disable the program must act
respectively on the ignition keys to increase
and to decrease (Fig.19).
Once enabled, pressing the button
is displayed on the first day of the week
and the figures for the hours and minutes
(Fig.20).
To select when to switch the cursor
flashing in the figures for hours using the key
and then pressing the buttons to
increase and decrease, you set the value
(Fig.21).
If you want the oven does not turn on a
specific day (eg, closing day), during the time
setting, select “OFF” lying between the 23
and 00 using the keys to increase and
decrease (Fig.21).
Pressing the button
again will switch
to minutes and then pressing the
button again will return the cursor under
the day of the week (Fig.20). To move to the
next or previous to press the buttons to
respectively increase and decrease.
When completed the setting, press again the button
and wait about
five seconds. Data is automatically stored and you return to the previous
function.
18
19
20
21
22
Summary of Contents for SYNTHESIS 12/80V E
