5. OPERATION
SYNTHESIS E
17
5.4. Programming
5.4.1.
Cooking programs
It is possible to manage up to 6 different cooking programs. Each can be
set in the following order:
1. Cooking time (minutes : seconds)
2. Temperature setting (°C).
3. Top heating element power percentage
4. Bottom heating element power percentage
These parameters are normally indicated on
the display when the oven is on.
With the oven turned on it is possible to
modify all the programs that can be set, with
the oven turned off it is only possible to modify
the last program that has been used.
Turn on the oven and press the
key to
select the programme to modify (Fig.9).
Press the programming access key
to
enter the programming mode and move from
one parameter to the next (Fig.10).
A horizontal line flashes below the parameter
being programmed.
The program that is being modified is always
indicated at the top right of the display
To change the value, use the keys to
increase and to decrease (Fig.11).
By keeping the key pressed, you increase the
speed of data change.
If no key is pressed for more than 5 seconds, the displayed value is
memorised
and the oven automatically leaves the programming mode.
During the programming of the
and
keys are disabled, the
key exits programming mode.
The order of programming is as follows:
1. Cooking time
2. Temperature
3. Top heating elements power (%)
4. Bottom heating elements power (%).
9
10
11
Summary of Contents for SYNTHESIS 12/80V E
