REMOTE TRANSMITTER PROGRAMMIMG
BY MEANS OF EXTA LIFE APPLICATION
Remote programming allows to add push-buttons of a transmitter to a selected SRP-22 receiver
without a physical access to it (without pressing the PROG. push-button on a receiver). It is particu-
larly comfortable, in case receivers are already mounted in a building and access to them is difficult.
Requirements regarding remote programming of transmitters with SRP-22 receiver:
• EXTA LIFE controller must be installed in the system,
• receivers, the transmitter will be remotely assigned to, must be powered and paired with a
controller,
• transmitters must be within the controller’s operation range,
• transmitters, we want to assign to receivers remotely, must be paired with a controller,
• during one step it is possible to add only one transmitter to one SRP-22receiver.
To assign remotely selected push-buttons of a transmitter to the SRP-22 receiver, the fol-
lowing steps are required:
1. Pair the selected SRP-22 receiver with a controller.
2. Pair the controller with a transmitter, whose buttons you want to assign remotely to a receiver.
3. Choose the “Assign a receiver” option by means of a transmitter.
4. From the list of all paired receivers, choose the SRP-22 receiver to assign the particular transmit-
ter.
5. In the ‘Operation mode’ field select the mode, in which the transmitter will cooperate with a re-
ceiver. In case of SRP-22 the local and central modes are possible.
6. Choose push-buttons of a transmitter that will be assigned remotely to a receiver. It is required to
define the push-buttons realising the roller blind opening and closing functions. By pressing the
“Transmitter preview” button, the system displays a transmitter with assigned numbers of push-
buttons.
7. By pressing the “Save” push-button, a transmitter is remotely programmed in a receiver. As a
confirmation, the system displays the following message “Devices have been correctly paired”.
It is also possible to assign remotely a transmitter to a receiver by means of a receiver. To do it,
choose the “Assign a transmitter” option from the menu of a receiver.
