REMOTE TIME PROGRAMMIMG BY MEANS
OF EXTA LIFE APPLICATION
Opening and closing time configuration of a roller blind, which cooperates with the SRP-22 control-
ler is possible by means of a mobile application. To do it, first pair the particular SRP-22 controller
with the EXTA LIFE system controller. Next, to configure times, choose the “Configure” option from
the receiver’s menu. Then, from the configuration screen set basic parameters for the particular
controller. Current closing and opening times, read from a particular controller, are shown in the
form of “Closing time” and “Opening time” parameters. A user can manually change their values in
the range from 1 second to 18 hours.
Closing time configuration
To configure the closing time, the following steps are required:
1. Press shortly the “Configure closing time” push-button – it forces the roller blind opens com-
pletely.
2. After a complete roller blind opening, press again the “Configure closing time” push-button – it
causes the roller blind closes.
3. Immediately after a complete roller blind closure, press again the “Configure closing time” push-
button – to finish time programming procedure of a roller blind.
4. Press the “Save” button to save time in a controller.
Opening time configuration
To configure the opening time, the following steps are required:
1. Press shortly the “Configure opening time” push-button – it forces the roller blind closes com-
pletely.
2. After a complete roller blind closure, press again the “Configure opening time” push-button – it
causes the roller blind opens.
3. Immediately after a complete roller blind opening, press again the “Configure opening time” push-
button – to finish time programming procedure of a roller blind.
4. Press the “Save” button to save time in a controller.
Push-button to configure
closing time
Currently adjusted closing/opening times
with a possibility to enter manually values
from 1 sec. ÷ 10 min.
Push-button to configure
opening time