background image

DESCRIPTION

FEATURES

• control of window roller blinds or other devices by means of single-phase 230 V AC motors,

• compatible with a controller and EXTA LIFE system transmitters,

• two-way transmission – current roller blind position indicated in the application (% of c 

icon),

• maximum load: 350 W (2 A) - class AC-3,

• programmable external inputs (local and central control functions),

• connection possibility of a single or double roller blind push-button,

• programmable roller blind movement time,

• 2 programmable “favourite” settings for transmitters and external inputs,

• maximum 4 programmable „favourite” settings selected by means of an application,

• 2 operation modes in cooperation with transmitters (local / central),

• control type selection by means of an application: open – stop – close + roller blind position 

change by means of a slider,

• software update possibility,

• mounting in Ø60 mm junction box.

Flush roller blind controller SRP-22 is designed to control window roller blinds or other devices 

driven by 230 V AC one-phase motors. The control can be carried out either wired, by means of 

transmitters or the EXTA LIFE controller or wireless by means of debouncing roller blind push but-

tons. IN1 and IN2 inputs, configured in a mobile application, are used in the wired type of control. 

The inputs can operate in a local or central control mode. Single and double roller blind push-

buttons can be applied in both cases. Due to the two-way communication between a receiver and a 

controller, the current roller blind mode is shown in the mobile application by means of a respective 

icon and a “closing position” parameter.  This two-way communication allows for parameterisation 

of the controller and a remote adding of transmitters (without a physical access to a receiver). Frame 

encoding algorithm ensures control security, which is particularly important in case of roller blinds 

and garage gates.  SRP-22, apart from the controller, can be simultaneously operated by EXTA 

LIFE system transmitters. A larger number of transmitters can be added to a receiver which, in turns, 

enables an independent control from several places. The device is designed for (surface and flush) 

junction box installation. The receiver has an implemented function of a remote software update by 

means of the controller. The controller’s functionality has been increased by the following functions: 

programmable roller blind movement time and a possibility to define up to four favourite settings.

APPEARANCE

IN1 – roller blind push-button 

terminal (default setting: 

downward movement)
IN2 – roller blind push-button 

terminal (default setting: 

upward movement)
Motor terminals 

(downward movement)
Motor terminals 

(upward movement)
Power supply terminals L, N

Signalling diode - RGB

(receiving / transmission / mode)

Programming push-button

Summary of Contents for SRP-22

















Reviews: