Z3-MVE-100 V1.05.01a
___________________________________________________________________________________________
Z3 Technology, LLC
♦
100 N 8
th
ST, STE 250
♦
Lincoln, NE 68508-1369 U.S.A.
♦
+1.402.323.0702
28
7.3 The System Setup Tab
Parameter
Options (default in bold)
Notes
Local IP Address
192.168.x.y
(192.168.81.68)
Sets the IP address of the Z3-MVE-100
Local Netmask
255.255.z.w (
255.255.0.0
)
Sets the netmask of the Z3-MVE-100
Default Gateway
192.168.a.b (
192.168.0.1
)
Can generally leave this as “192.168.0.1”
Set Device Name
Can use to set name for Z3-MVE-100
Set Password
Can use to assign a password to the Z3-MVE-100
update device firmware
See “Making a Firmware Update” on p.23
7.4 The User Presets Tab
Parameter
Options (default in bold)
Notes
new
Define a new configuration file (see p.19)
rename
Rename a configuration file (see p.19)
delete
Delete a configuration file (see p.19)
export
Export current settings to a file
import
Load settings from a previously exported file
7.5 Values Appearing at the Bottom of All Tabs
Parameter
Options (default in bold)
Notes
preset
encoder factory default
decoder factory default
(any user-defined profiles)
The configuration file to use.
Encoder/decoder factory default = Factory
settings. Can also add more profiles – see p.19.
Save
Click on this to save preset value to what was
selected. Note, if different values in different
tabs are changed, then “Save” should be
clicked in each tab.
Operating Mode
Encoder
Decoder
Selects between encode and decode.
Stop
Stop encode or decode.
Start
Start encode or decode.
System State
(Status Message)
Idle –
waiting for command
Idle – starting …
Running – active
Running – stopping …
Idle – stopped
The current state of the encoder/decoder.
