Z3-MVE-100 V1.05.01a
___________________________________________________________________________________________
Z3 Technology, LLC
♦
100 N 8
th
ST, STE 250
♦
Lincoln, NE 68508-1369 U.S.A.
♦
+1.402.323.0702
14
to “HDMI”, change “Dest IP Address” to your IP address set in step (4b) (default value =
192.168.0.6), and change “Dest Port” to 5004.
Figure 10
shows what the menu settings should
look like after the 3 changes:
Figure 10 Z3-MVE-100 Configured for TS Encode
(10) Next, click on “Start.” You should see the system state change from “idle” to “Starting …”.
After about 5 seconds, the state should then change to “Running.”
-If you hooked up “HDMI Out” to an HDMI monitor in Step (2), you should see the video being
encoded on the HDMI monitor.
5.5 Opening a VLC Client to Receive the Encoded Stream
(1) Change Output format to
“MPEG-2 TS”
(2) Set to PC IP address
(3) Note value of Dest Port
(4) Click “Start”
(5) Note system
status change
