Z3-MVE-100 V1.05.01a
___________________________________________________________________________________________
Z3 Technology, LLC
♦
100 N 8
th
ST, STE 250
♦
Lincoln, NE 68508-1369 U.S.A.
♦
+1.402.323.0702
19
7.0
PERFORMING OTHER OPERATIONS WITH THE Z3-MVE-100
7.1 Saving Current Settings
If you have a specific configuration you would like to preserve, you can save it so that when the Z3-
MVE-100 is powered off and back on, it automatically uses those settings. This can be done with
the steps described below.
In this example, we will set the encoder to a lower bitrate, save that configuration, and confirm
that this configuration is what is used when booting up.
(1) Click on the “Encoder Settings” tab. In this tab, if the Encoder or Decoder is running click on
“Stop”. If in Decoder mode, change to Encoder mode. When in Encoder mode, change the
bitrate to “3000k”:
(1) Set Video Bit Rate
Figure 17 Modifying bitrate in encoder
(1) Set Video Bit Rate
to 3000K
