Z3-MVE-100 V1.05.01a
___________________________________________________________________________________________
Z3 Technology, LLC
♦
100 N 8
th
ST, STE 250
♦
Lincoln, NE 68508-1369 U.S.A.
♦
+1.402.323.0702
22
(6) Now that you’ve saved this setting, power down the board. Also exit your web browser.
(7) Power the board back up and bring the Web GUI back up.
(8) Confirm that the Web Interface is using the “low_bitrate” setting and that 3Mbps is being used
for encode:
(9) You have now successfully used a customized setting.
One final note: factory defaults is also an option. Simply select “encoder factory default”
from the preset menu.
Figure 22 Example of Custom Configuration Being Used After Reboot
Low bit rate of 3Mbps
being used
“low_bitrate” custom
profile being used as the
preset value
