Z3 Technology Z3-MVE-02, User Instructions

Page: 23 / 36

DOC-USR-0038-05
_______________________________________________________________________________________
Z3 Technology, LLC ♦ 100 N. 8th St. STE 250 ♦ Lincoln, NE 68508-1369 USA ♦ +1.402.323.0702
23
6.0
RUNNING DECODE ON THE Z3-MVE-02
Running decode and display requires a source streaming over the Ethernet (another Z3-MVE-02 unit, for
example), an Ethernet cable, a hub/router, a coaxial cable, an SDI to HDMI converter, an HDMI cable, and a
monitor with HDMI input.
(1)
Follow the steps described in Section
5.0
to connect the Z3-MVE-02 and access the web server to control
settings.
(2)
Connect the streaming source to a hub/router that is connected to the control PC. Connect the
Ethernet port of the Z3-MVE-02 to this same hub/router:
(3)
Connect “ASI/SDI Output” of the Z3-MVE-02 with a coaxial cable to “SDI In” of the SDI to HDMI converter
().
(4)
Connect the “HDMI Out” of the SDI to HDMI converter with an HDMI cable to “HDMI In” of a monitor.
(5)
The control PC should still have the Web GUI of the Z3-MVE-02. If the encoder is still running from the
previous demo, click “Stop Encoder” (
Figure 10
).
(6)
In the top right corner is an “Operating Mode” selector. Select “Decoder”
Figure 22 Z3-MVE-02 Connections for Decode
Select
“Decoder”
Figure 23 Z3-MVE-02 Operating Mode Selector
(2) Connect SD/HD
SDI Output to
converter box (1) Connect Ethernet