DOC-USR-0038-05
_______________________________________________________________________________________
Z3 Technology, LLC
♦
100 N. 8th St. STE 250
♦
Lincoln, NE 68508-1369 USA
♦
+1.402.323.0702
24
(7)
This should cause the GUI to change to the Decoder configuration menu:
(8)
Make sure “Input Interface” is Ethernet.
(9)
Make sure “Input Format” and “IP: Port” matches what the source is streaming to.
(10)
Make sure “Output Interface” is set to “SDI.”
(11)
Click “Start Decoder”
(12)
You should see video on the monitor.
Figure 25 and Figure 26 on the next 2 pages show an example of streaming from one Z3-MVE-02 to another.
Note that the encoder and decoder need to have different IP addresses. Since one uses DHCP in this
example, this is automatically taken care of. The streamer and decoder are connected via the Ethernet.
Figure 24 Z3-MVE-02 Decoder Configuration Menu
