DOC-USR-0038-05
_______________________________________________________________________________________
Z3 Technology, LLC
♦
100 N. 8th St. STE 250
♦
Lincoln, NE 68508-1369 USA
♦
+1.402.323.0702
15
5.5 Streaming RTP
Once you have UDP streaming running, it is relatively simple to change to RTP streaming. All that is needed
is a change of settings and an SDP file (an example file is provided with the software release from Z3). To
stream using RTP, do the following steps:
(17)
Click on “Stop Encoder” to stop the current encoding session.
(18)
Make sure “Output Interface” is “Ethernet (VBR)” (see
).
(19)
Change “Output Format” from “MPEG-2 TS” to “RTP” (see
)
(Note: Do
not
select “MPEG-TS over
RTP”).
(20)
Confirm that “Dest Port” () is 8888 (this will be important for the VLC configuration).
(21)
Click “Start Encoder” to begin the encoding session.
(22)
Copy the “z3_multicast_h264_mp1l2_48000.sdp” file received from Z3 to your PC.
(23)
Open VLC. Select “Media – Open File” and select the “z3_multicast_h264_mp1l2_48000.sdp” file you
just copied.
(24)
You should then see RTP video streaming on VLC:
Figure 13 Example of Z3 Video Streaming to VLC (RTP)
