DOC-USR-0038-05
_______________________________________________________________________________________
Z3 Technology, LLC
♦
100 N. 8th St. STE 250
♦
Lincoln, NE 68508-1369 USA
♦
+1.402.323.0702
27
7.0
PERFORMING OTHER OPERATIONS WITH THE Z3-MVE-02
7.1 Saving Current Settings
If you have a specific configuration you’d like to preserve, you can save it so that when the Z3-MVE-02 is
powered off and back on, it automatically uses those settings. This can be done with the following steps:
(1)
Once you make a change you want to save, click on “Save” at the bottom of the configuration menu
[“Decode” is shown here. The same applies for “Encode” mode]:
Figure 27 The “Save Settings” Button
Now, if you reboot the Z3-MVE-02, you should see that decode will automatically start with those
settings.
7.2 Making a Firmware Update
There are 2 methods to make an update: Through the web GUI and by SD card. Both are described below.
Click “Save” to save
current settings
