DOC-USR-0038-05
_______________________________________________________________________________________
Z3 Technology, LLC
♦
100 N. 8th St. STE 250
♦
Lincoln, NE 68508-1369 USA
♦
+1.402.323.0702
13
(12)
The encoder may have already started. If it has, click on “Stop Encoder”. The status should then
change to “Stopped”. Then click on “Start Encoder”. Once you do this, the status will change. If the
encoder hasn’t started already, simply click on “Start Encoder” and observe the status change:
Figure 10 Z3-MVE-02 Web Menu – Start/Stop/Status Section
(2) Status changes to
“Stopped”
(3) Click “Start Encoder”
(1) If necessary, click “Stop Encoder”
