35
CONFIDENTIAL
DOC-USR-0018-09
____________________________________________________________________________________
Z3 Technology, LLC
♦
100 N. 8th St. STE 250
♦
Lincoln, NE 68508-1369 USA
♦
+1.402.323.0702
ASI PCR Interval
(for MPEG-2 TS)
40-
100
How frequently PCR should be inserted in
the ASI stream, in milliseconds.
PID Audio, Video,
PCR (for MPEG-2 TS)
0 – 999 (
120, 220, 520
)
The PIDs assigned to audio, video, and the
PCR in the TS stream. Values are
separated by a space.
Local IP Address
192.168.X.XX (
192.168.0.65
)
Sets the IP address of the Z3-DME-01.
Disregarded if “Use DHCP” is checked.
Local Netmask
255.255.X.X (
255.255.0.0
)
Sets the netmask of the Z3-DME-01.
Disregarded if “Use DHCP” is checked.
Default Gateway
192.168.X.XX (
192.168.0.1
)
Can generally leave as “192.168.0.1”
Disregarded if “Use DHCP” is checked.
Use DHCP [Checkbox] On /
Off
On -> Use DHCP to get IP address at boot-
up (see “Using DHCP”).
Stop [Button]
-----
Stop current encode session.
Start [Button]
-----
Start encode session.
Status
Idle
, Stopped, Running
Current status of the encoder.
Load Factory Default
Settings [Button]
-----
Press to load the default values installed
at the factory.
Load User Settings
[Button]
-----
Press to load settings previously saved by
the user.
Save User Settings
[Button]
-----
Press to save current settings to a file.
Set Name
Use to set name for the Z3-DME-01.
Set Pass
Use to assign a password to the Z3-DME-
01
.
UPDATE
Update firmware.
Note 1: Encode Resolutions Supported:
WQVGA (320x180), QVGA (320x240), SIF (352x240), CIF (352x288), 2-SIF (352x480), 2-CIF (352x576),
640x360, VGA (640x480), 4-CIF (704x576), PAL PAR 12:11 (720x576 w/16:9 aspect ratio),
D1 PAL (720x576), D1 NTSC (720x480), 16:9 PAL (1024x576), 4/5 720p (1024x720), 720p (1280x720),
3/4 1080i (1440x1080), 1080p (1920x1080), and 1080i (1920x1080)
“Follow input” = Generate encoder resolution based on capture resolution detected
