28
CONFIDENTIAL
DOC-USR-0018-09
____________________________________________________________________________________
Z3 Technology, LLC
♦
100 N. 8th St. STE 250
♦
Lincoln, NE 68508-1369 USA
♦
+1.402.323.0702
(9)
Make sure “Input Interface” is Ethernet.
(10)
Make sure “Input Format” and “IP: Port” matches what the source is streaming to.
(11)
Make sure “Output Interface” is set to “SDI.”
(12)
Click the “MVE” Flag (if a DME-01, MVE-02, MVE-20 or an MVPR-01 is being used as the Encoder, you
can click this button to allow faster decode). Your settings should look like the following:
(13)
Click “Start Decoder.”
(14)
If you haven’t already, go back to the Encoder system and click “Start”
(15)
After a few seconds you should see video on the monitor.
(16)
You can also view the content using VLC. Open VLC and use the RTSP URL as described in Section
Figure 31 Example Decoder Settings for End-to-End Streaming
