Z3 Technology HETM-DCK-21 User Instructions Download

Page: 83 / 83

HETM-DCK-21 User Instructions

DOC-USR-0202-01

______________________________________________________________________________________

Z3 Technology, LLC

♦

100 N 8

ST, STE 250

♦

Lincoln, NE 68508-1369 USA

♦

+1.402.323.0702

Area Connection settings of the PC running VLC.

▪

Problem: I do not see video in VLC. (UDP)

-Does the IP address set in Dest Address equal the IP address of the PC running VLC?

-Does the port number in Dest Port equal the value entered in the URL for VLC?

-Is the PC capable of decoding 4K and/or HEVC on VLC? See section 9.1 for PC requirements and

configuration.

-Are all firewalls on the network turned off?

-Try connecting the PC directly to the camera without any routers, switches, etc.

▪

Problem: I’m receiving a “Destination Unreachable” error in the user interface. (UDP & TSRTP)

- Try rebooting by disconnecting power.

▪

Problem: I do not see video in VLC. (RTP)

- One of the provided SDP files is required. Is the correct SDP file being used?

- H265(HEVC) video: use the SDP file entitled “z3-h265-he4k-dck.sdp”

- H264(AVC) video: use the SDP file entitled “z3-h264-he4k-dck.sdp”

- Is “Dest Port” set to 5004?

▪

Problem: I do not see video in VLC. (RTSP)

-Is the version of VLC version 2.1.5 or newer?

-Are all firewalls on the network turned off?

-Try connecting the PC directly to the camera without any routers, switches, etc.

▪

Problem: Video quality in VLC is poor (H.265/HEVC).

- Is the version of VLC 2.2.4 or newer for HEVC/H.265 decoding?

- Does your PC meet the requirements outlined in Section 9.1?

▪

Problem: Latency in VLC is too high.

- Is the network caching value in VLC set to 200ms? Refer to Section 6.4 for more information.

Appendix D: Warranty

Z3 Technology’s Express Limited Warranty will be void if the label on the hardware bearing the Serial Number is

removed, tampered with or defaced. You can view Z3 Technology’s full hardware warranty at

http://z3technology.com/Support/Z3Cam-4K-HW-Warranty.html

To submit a warranty claim, complete a Return Material Authorization (RMA) request form online at

http://z3technology.com/Support/Report-RMA.html

. Your receipt or invoice with the original purchase and ship date is required

for warranty coverage.

Summary of Contents for HETM-DCK-21




















































































Search results

Summary of Contents for HETM-DCK-21

Reviews:

Related manuals for HETM-DCK-21

Brands by name

Popular brands

Z3 Technology HETM-DCK-21, User Instructions

Search results

Summary of Contents for HETM-DCK-21

Reviews:

Related manuals for HETM-DCK-21

Brands by name

Popular brands