Z3 Technology HETM-DCK-21, User Instructions

Page: 59 / 83

HETM-DCK-21 User Instructions
DOC-USR-0202-01
______________________________________________________________________________________
Z3 Technology, LLC ♦ 100 N 8
th
ST, STE 250 ♦ Lincoln, NE 68508-1369 USA ♦ +1.402.323.0702
59
Set 802.1X Sets configuration for 802.0x on the wired
connection. See
DOC-USR-0161-0x for details.
Configure FPGA* 4K
HD
Configures FPGA config for HETM-DCK-2x unit.
The HETM-DCK-2x has two KEL connectors, one for
Sony 4K camera, and the other for Sony HD
camera. Only one camera input is active,
dependent on the FPGA setting.
Configure
ONVIF* Enable/Disable ONVIF and control number of
cameras to advertise to ONVIF clients.
Set Term Server Enable/Disable remote terminal server.
Set ZFinder Enable/Disable ZFinder support on unit.
Update device
firmware Button Access the Software Updater to update the
firmware on your device. An image file of the
desired firmware is needed.
Download
device logs
Button Extract a set of diagnostic logs that can be
provided to Z3 in the event of an issue to be
reported. The resulting file is saved on the PC
with the user interface open.
Reboot Button Restarts the unit without the need to disconnect
power.
10.2 The User Presets Tab
Button Notes
new Define a new configuration file.
Up to nine configurations can be created.
rename Rename a configuration file.
delete Delete a configuration file.
export Export current settings to a file.
import Load settings from a previously exported file.
Reset Resets presets
Factory reset Reset configuration to factory defaults, except for IP Network settings