HETM-DCK-21 User Instructions
DOC-USR-0202-01
______________________________________________________________________________________
Z3 Technology, LLC
♦
100 N 8
th
ST, STE 250
♦
Lincoln, NE 68508-1369 USA
♦
+1.402.323.0702
41
7.4.2
Camera Controller Software
(7)
Install your camera control software onto your PC.
(8)
Launch the controller software application.
(9)
Set the port name to match the
COM Port
selected previously.
(10)
Set the
Baud Rate
to
9600
.
(11)
Save these settings.
(12)
Remember, you may need to close and restart your camera controller application for changes to
take effect.
If you do not have camera control software it is possible to write your own. An example application
for sending VISCA commands from a Windows PC to the HETM-DCK-21 has been provided in
APPENDIX C: Example Camera Controller Application.
Figure 36 Camera Controller Software Configuration
Com2TCP
Camera Control
Software
Match Values
Set to
“9600kbps”
