HETM-DCK-21 User Instructions
DOC-USR-0202-01
______________________________________________________________________________________
Z3 Technology, LLC
♦
100 N 8
th
ST, STE 250
♦
Lincoln, NE 68508-1369 USA
♦
+1.402.323.0702
71
PCR PID
*
(UDP/TSRTP/TSFILE Only)
0 – 8191 (
521
)
PID assigned to PCR in the TS stream.
PCR Interval
*
(UDP/TSRTP/TSFILE
Only)
(
50
)
Interval assigned to PCR in the TS
stream in milliseconds.
PMT PID
*
(UDP/TSRTP/TSFILE Only)
0 – 8191 (
31
)
PID assigned to PMT in the TS stream.
Video Max Delay
*
(UDP/TSRTP/TSFILE Only)
(300)
Sets encoder maximum video delay in
milliseconds.
TS RATE
(UDP/TSRTP/TSFILE Only)
125K – 20000K
(
5000K
)
The overall bitrate of the transport
stream.
Normally, this value should be set to
1.25 * (video b audio bitrate).
This can be set to higher values to allow
leeway for times when many bits are
needed to encode. This can be
especially useful for ensuring smooth
playback at lower bitrates.
TS Lowlat Mode
*
(UDP/TSRTP Only)
False
True
Selecting “True” causes the TS mixer to
instead send packets out as soon as it
receives them rather than buffering
them. This results in lower latency at
the expense of decreased network
efficiency and a less smooth bitstream.
There is a limit of 5Mbps for TS Lowlat
Mode.
Must be set to “False” for stream to be
compliant with ISO 13818-1 systems
specification for transport stream
timing.
Authentication (RTMP/RTSP/RTMPS
Only)
Disable
Enable
If authentication is required within the
Wowza streaming server, select
“Enable” to enter user credentials.
User (RTMP/RTSP/RTMPS Only)
Enter a valid Wowza user name.
Password
(RTMP/RTSP/RTMPS Only)
Enter a valid Wowza password.
