FV2K-1XA User Guide
DOC-USR-0262-05
______________________________________________________________________________________
Z3 Technology, LLC
♦
100 N 8
th
ST, STE 250
♦
Lincoln, NE 68508-1369 USA
♦
+1.402.323.0702
60
(7)
A pop-up window appears with a message that the settings were saved successfully.
(8)
Return to you channel tab to set additional encoding configuration parameters for your stream. See
Section 10.7, The CH1 Tab (Channel 1), for more information on the advanced settings available for
each streaming output.
(9)
You can return to the use of limited settings by un-checking the
Advanced Settings
box in the
System Setup tab and saving that to the preset.
8.3
Channel 2 PIP on Channel 1
The FV2K-1XA allows for the Picture in Picture (PIP) of channel 2 to be placed on the channel 1 stream.
A common case is to have a PIP of the IR camera on the stream for the visible video.
1.
Start channel 1 from the CH1 tab.
2.
On the CH2 tab under Output Setup select “True” from the Channel 1 PIP Enable dropdown.
3.
A PIP Location dropdown will appear. Select the desired location from the dropdown and click
“start”.
Figure 61 Accessing Advanced Settings
