FV2K-1XA User Guide
DOC-USR-0262-05
______________________________________________________________________________________
Z3 Technology, LLC
♦
100 N 8
th
ST, STE 250
♦
Lincoln, NE 68508-1369 USA
♦
+1.402.323.0702
38
Figure 33 Micro SD connection
(1)
Connect a USB flash drive or other USB storage device to USB on the back of the camera, or insert a
micro SD card into the slot on the side of the DCK.
Note
:
The storage device must be formatted in either
FAT32, VFAT, EXT3, or EXT4 format.
(2)
Return to the user interface, and if necessary, click on the
Stop
button in the
Channel Controls
section of the user interface CH1 tab or the
Stop All
button in the lower right corner of the screen of
any tab.
(3)
Verify the
Output Resolution
is set to
Follow Input
to output a HD stream. If a lower resolution
output is desired, select this in the dropdown menu and resizing will occur.
(4)
Select the
Video Codec
you would like to use for your video encoding.
(5)
Under Output Setup, select
TSFILE
from the
Output Format
dropdown menu.
(6)
Click on the
Output Device
field to select your USB storage location. This will automatically populate
if a USB is detected.
Connect Storage
to USB 2.0 Port
Figure 32 USB Connection
Insert Micro SD
Card into slot
