FV2K-1XA User Guide
DOC-USR-0262-05
______________________________________________________________________________________
Z3 Technology, LLC
♦
100 N 8
th
ST, STE 250
♦
Lincoln, NE 68508-1369 USA
♦
+1.402.323.0702
73
Advanced
Settings
Checked
Unchecked
Check this box for advanced encode settings to appear
on the channel tab.
Single Input
(Low Latency)
Checked
Unchecked
Check this box to enable single input mode which
enables lower latency encodes and allows slice mode
on channel 1. See DOC-USR-0169-0x for more details
(reboot required)
Display Setup
Resolution
AUTO
NTSC
PAL
Selects the desired resolution for Composite pass-
through output.
Source
Primary
Secondary
Selects the desired source for the Composite pass-
through output.
Set Display
Button
Click once the desired selection is made in the
Resolution dropdown menu to make real time
changes.
Device Management
Set Device
Name Button
Sets a custom name for the camera to appear in the
user interface.
New device
Name
Text box to enter desired device name.
Set Password
Button
Sets a password to limit access to the user interface.
New password
Text box to enter new password.
Password again
Text box to re-enter new password.
Must match previous field.
Time Settings
Click this button to access Time configuration options
Enable Time
Service
None,
Network Time Protocol
(NTP)
, IEEE 1588 PTP
Sets desired time service on the unit.
Time Zone
America/Chicago
Allows for selection of desired time zone.
NTP Servers
pool.ntp.org
Address of desired server for NTP.
PTP
Server/Client
Role
Auto
, Client only, Server only
Sets the PTP role; see DOC-USR-0223-0x for details
Enable NTP
True
False
Sets whether Simple Network Time Protocol (NTP) is
enabled.
Time Zone
America/Chicago
Allows for selection of desired time zone.
NTP Servers
(128.138.141.172)
Address of desired server for NTP.
Set HTTP/HTTPS
Sets HTTP/HTTPS access to the web UI. See DOC-USR-
0164-0x for more information
Set 802.1X
Sets configuration for 802.0x on the wired connection.
See DOC-USR-0161-0x for details.
