FV2K-1XA User Guide
DOC-USR-0262-05
______________________________________________________________________________________
Z3 Technology, LLC
♦
100 N 8
th
ST, STE 250
♦
Lincoln, NE 68508-1369 USA
♦
+1.402.323.0702
86
status
!Not running, IDLE,
STOPPED, RUNNING,
POLLING
Current status of the encode
process.
IDLE
indicates no valid input data is
present.
STOPPED
indicates that the unit is
not currently encoding. Must be in
this mode to make any
configuration changes.
POLLING
indicates “start” was
pressed and the encoder is waiting
for valid input data to be detected.
RUNNING
indicates the unit is
currently encoding.
Error statuses will be preceded by
an exclamation point and include a
description of the error.
Note 1: Encode Resolutions Supported:
1080p (2MP), 1280x1024, 720p (1MP), 480p, 576p, 1024x576, 704x576, 640x480, 640x360, 420x380,
352x576, 352x288, 352x240, 320x240, and 320x180
Follow input
“Follow input” = Generate encoder resolution based on capture resolution detected
10.8
The CH2 & CH3 Tabs (Channels 2 & 3)
The FV2K-1XA supports simultaneous encode into multiple different resolutions and bitrates. Each output
stream can be set using a separate Channel tab. See the CH1 Tab section for detailed descriptions of
available settings on the CH2 and CH3 tab. If these tabs are not present, you can create a them by clicking
on the “+” tab. Only three channels are supported.
The maximum performance for two channels is one 1080p60 plus one 720p60 stream.
CH2 Default:
Parameter
Options (default
in bold)
Description
Encoder Setup
Output
Resolution
320x180
–
1920x1080
(1280x720)
Follow Input
The encode resolution. If this resolution is different from the
capture resolution (1920x1080), resizing will occur.
