- 16 -
Figure 16.Build Warn Window
a)
Gap axis compensate:
There is a gap, about 0.15mm, between
recoater and resin level. This may cause the height of the finished
part to be in excess of 0.15mm. The actual required height of the
part is maintained by ticking the “Gap axis compensate” feature.
Note:
Do not select this function if printing with raft or if finished part
needs to be polished.
b)
Precise mode:
High resolution printing function.
c)
Rapid mode:
Quick printing function.
Pause
: Pause printing.
Restart
: Restart printing.
Stop
: Stop printing.
Setup
: Setup the parameters of the machine.
Platform
: Manual control of the motion system. Click on the platform
button and the Platform window (see Figure 17) pops up.
The waiting time before printing
