- 10 -
must only be operated (besides turning on/off) by trained technical
personnel under guidance of our technical support engineers.
2.1.7 Main Power Switch
The main power switch (see Figure 12) is located at the back of machine.
Turn clockwise to switch on and anti-clockwise to switch off.
Figure 12.Main Power Switch
Important
:
Please ensure that the machine is properly grounded before
switching on or it may damage the laser system or the electrical
components.
2.2 Start/Stop SL
2.2.1 Start SL
a)
Turn main power switch clockwise to switch on.
b)
Power indicator light will turn on. Push the Control On button to
power on the control system and the monitor will turn on.
c)
The standard recommended temperature setting is 32
℃
. However,
for resin which does not require heating, shut off the heater system.
