- 22 -
before the laser begin scanning.
8-Build Status
: Showing current build status, including Laser Power,
Resin Temp., Est. Total Time, Building Time, Total Layer, Resin, and Est.
Total Weight.
3.2 Printing Step
a)
Click on
to add SLC files.
b)
Click the edit (see Figure 23) button in Build Project File to position
parts for printing.
Figure 23.Build Project File Frame
c)
Click on
, start to print.
d)
The alarm/speaker will beep 10 seconds after printing is completed.
Wait (the default delay time is 10 minutes) for the build plate to
automatically rise up then remove the finished part for post
