ZPrinter
®
650 Hardware Manual
Printer Maintenance
zcentral.zcorp.com
65
All Rights Reserved
10/21/08
6.6 Clean The Fast Axis Pulleys
Frequency:
On a regular schedule, depending on your usage. Or, whenever the printer has problems or
errors related to the Fast Axis motion.
1. Slide the fast axis out toward you.
2. Using the pick from the Accessories Kit, reach into the keyhole slot at the end of the fast axis and care-
fully remove any debris or powder from the teeth of the pulley. Slide the printhead carriage back and
forth to rotate the pulley and expose all the teeth.
3. Repeat this for the pulley at the other end.
4. Vacuum or sweep up any debris that fell on the deck or build bed.
6.7 Clean The Slow Axis Rails and Pulleys
Frequency:
On a regular schedule, depending on your usage. Or, whenever the printer has problems or
errors related to the Slow Axis motion.
1. Remove the two screws inside the front lip of the build chamber. This makes it easier to remove the
deck.
