ZPrinter
®
650 Hardware Manual
Setup And Print The Build
zcentral.zcorp.com
25
All Rights Reserved
10/21/08
ZPrint Transform Menu
Translate
Positions the selected part by the amount specified
for the
X
,
Y
, and
Z
coordinates. The default values of
0,0,0, represent the lower-left corner of the Build
Bed.
Rotate
Rotate/Rotate Group
- Rotates the selected part in
the specified plane (view).
Select your part (left-click on the part in ZPrint) and
select
Transform >
Rotate
. Select the plane (view)
to rotate the part in and then enter the degree of
rotation in the
degrees
field.
Enter a negative value to rotate the part clockwise
by that amount.
Scale
Scale/Scale Group
- Scales the selected part by
the dimensions specified in the
Relative
or the
X
,
Y
,
and
Z
fields.
Select the part. Select
Transform > Scale
. Limit the
scale to the maximum limits of the build area -10 x
15 x 8 inches.
(254 mm x 381 mm 203mm).
