ZPrinter
®
650 Hardware Manual
Routine Cleaning
zcentral.zcorp.com
39
All Rights Reserved
10/21/08
4. Squirt the distilled water onto the Caps. The water should drain out through the Spittoon under the
Caps.
5. Use a dry paper towel to wipe the caps clean.
6. Remove the paper towels from the Build Bed and Deck. Wipe up any water on the Build Bed, Fast Axis
or Deck.
7. Remove the paper towels from the front overflow and dry it thoroughly.
8. Vacuum the Build Bed and Deck remove any powder dislodged from the Rails or Carriage.
9. Be sure the Parking Caps are completely dry before starting your next build.
Note: If the Caps are very dirty, or if washing them as above is not sufficient, then remove the Caps from
the printer and wash them under running water. Dry them thoroughly before reinstalling them in the Fast
Axis.
