ZPrinter
®
650 Hardware Manual
Additional Operations
zcentral.zcorp.com
58
All Rights Reserved
10/21/08
5.7 Position Build Piston (Build Bed)
The Build Bed platform must be in its proper position at the top of the Build Bed in order for the printer to fill
the bed and spread a layer of powder before starting a print job. If you see the message
RAISE BUILD
in
the
Printer Status
dialog, go to the printer and select
PREP BUILD CHAMBER
to raise the platform to
its proper position.
5.8 Cover
The printer cannot start a print job when the top cover is open. If the top cover is open, go to the printer and
close it. Do not open the cover while the machine is printing.
