6
DynaPak 3010RNM Version 01102001 ATEX Rev.
YZ Systems, Inc. • 3101 Pollok Drive • Conroe, Texas • USA • 77303 • P: 936.788.5593 • F: 936.788.5720
4. System Installation:
CAUTION:
**Incorrect operation of valves (over tightening) can result in damage to the valve
components (isolation valve bonnet assembly) which might result in the valve
stem being screwed out of the probe body. This of course results in product at
pipeline pressure being vented continually through this port until this section of the
pipeline is shut in. Be aware of the following procedures and information.
· DynaPak valves are of soft seat design and should only be closed
or opened with fingers. No wrenches should ever be used.
·If a valve will not seal off with finger tight operation the valve should
have maintenance performed to allow proper operation of the valve.
4.1 DynaPak-3010RNM With Slipstream Kit
a. Mount the DP-3010RNM with slipstream kit
on a vertical 2" pole.
b. Connect the slipstream adapter to the pipe-
line product supply and product return
connections as shown in the diagram.
c. Connect the actuation gas supply (75 psi) to
the actuation gas connection located on the left
hand side of the sampler.
d. Connect the sample out connection to the
sample vessel.
e. Wire the PIM-100 to the flow input device
(Turbine Meter) to be used.
(Refer to diagram
#7, Wiring Control Document)
f. Before applying pipeline pressure to the
DP-3010RNM, ensure that the product supply
valve is closed.**
g. After pipeline pressure has been applied to
the sampler, check the slipstream tubing
connections for leaks.
h. Open the product supply valve.
i. Follow the "Operational Check and Leak
Testing Procedures" detailed in Section 6.
10 1/4"
Product Supply
Relief Valve
Static Mixing
FLOW
Element
Loop
1000
500
2000
psi
1500
Pr eCharge
300
250
275
225
80%
175
200
150
(By Customer)
*Vessel Tray
(By Customer)
2" Pipestand
Pressure Switch
Pulse Input Module
Y−Z INDUSTRIES, INC.
BOX 890 SNY DER, TEX AS 79550
PIM- 100
Fact ory
Approved
Sy st em
Mut ual
Actuation
50-75 psi
(Optional)
*Slipstream Adpater
w/Self-Cleaning Screen
Product Loop Return
Loop Driver
w/Static Mixer
(Optional)
FLOW
100
125
75
25
50
0
Pro duct
1000
500
2000
ps i
1500
Sample Vessel
(Optional)
YZ Durasite
Solar Panel Option
21 1/8"
ps
i
Sampled
Product
(Optional)
SPO-12
*Denotes items included in
DP-3010RNM System
4.1 c Actuation Gas Supply
75 psi (By Customer)
4.1 d Sample Out to
Sample Vessel