YZ Systems DynaPak 3010RNM Series, Support Manual, Page: 15 / 33

15
DynaPak 3010RNM Version 01102001 ATEX Rev.
YZ Systems, Inc. • 3101 Pollok Drive • Conroe, Texas • USA • 77303 • P: 936.788.5593 • F: 936.788.5720
8.3 Adjust the pump volume adjustment knob to
the value used in the calculation in step 8.1.
8.4 Input from the PIM-100 is a dry contact:
a.interface between the PIM-100 and the
Z-65/6.1 terminal strip will be pre-wired.
b.Turn mode switch 1 to on.
c.Turn mode switch 2 to off.
d.Turn mode switch 3 to on.
e.Turn mode switch 4 to off.
Number of turns open on the pump volume knob
3
6
12
Sample pump displacement per stroke
.1cc
.2cc
.4cc
Dry contact or
duration min.)
open collector
(20 mSec
+
_
Factory
Approved
System
Mutual
8. Sampler set-up:
Continuous proportional-to-flow sampling